Standard Products

Full Nuts

Metric Full Nuts DIN 934, BSW/BSF/UNC/UNF Full Nuts.

Half/ Lock Nuts

Metric Half Nuts DIN439, BSW/BSF/UNC/UNF Lock Nuts.

Nyloc Nuts

Metric, BSW/UNC/UNF/BSF. Secure, vibration-resistant. DIN 982/985

Wing Nuts

UNC/UNF/BSW - Multiple finishes, and sizes made to DIN315.

Roofing Nuts

Weather resistant, DIN 562 range of sizes and matching roofing bolts.

Dome Nuts

DIN1587 Enhanced aesthetics with robust, protective fastening.

Cap Nuts

Smooth finish, added protection with reliable security. DIN917

BA Nuts

Precision small size threading DIN934

Square Nuts

Strong grip and stability, ideal for robust fastening. DIN 557.

Nylon Dome Nuts

Lightweight, electrical resistance properties. DIN986

Grade 10/12 Full Nuts

DIN 934 Hardened for automotive /structural / high temperature.

Castle / Slotted Nuts

Secure fastening with provision for cotter pin safety. DIN 935.

Flange Nuts

Increased surface grip and stability via the wider bottom. DIN 6923.

Left Hand Nuts

Left Hand Nuts, BSW, BSF, UNC/UNF Left Hand Lock Nuts. DIN 934.

Grade 10 Nylon Nuts

Metric, BSW/BSF/UNC/UNF. Secure, vibration-resistant. DIN985.

Fine Pitch Full Nuts

Precision Fine Pitch Full Nuts, BSW, BSF, UNC/UNF Full Nuts. DIN934.

Brass Nuts

Great for high temperature applications. DIN 934.

PAL Nuts

Spring steel which allows them to distort under load. DIN 7967.

Grade 12 Full Nuts

Hardened Nuts BSW, BSF, UNC and UNF Nuts. DIN 934.

Fine Pitch Lock Nuts

Precision Fine Pitch Lock Nuts, BSW, BSF, UNC/UNF Full Nuts. 439B.

Stainless Nuts

For high corrosion resistance. Full range of types available. DIN 934.

Vee Lock Nuts

AKA Stover Nuts, Internal Flange & Serrated Bottom. DIN 980.

Weld Nuts

Designed Specifically for Welding Applications. DIN 929.

Fine Pitch Nyloc Nuts

BSW/BSF/UNC/UNF Anti-Vibration. DIN 985.

HT Bolts

High-tensile strength for demanding load-bearing. DIN 931.

8.8 Fine Pitch Bolt Sets

High-strength threads for precise, reliable fastening. DIN 961.

Rilsan Bolt/Nut/Washer

Coated with anti-corrosion, wear-resistant Rilsan finish. DIN 601.

Socket Caps

Designed for flush, secure, and clean installations. DIN 912.

HT Bolt Sets

High-tensile strength for demanding load-bearing. DIN 933.

10.9 Fine Pitch Sets

High-strength threads for precise, reliable fastening. DIN 961.

Flange Sets mm / imp

Flange head for even distribution & reduced slippage. DIN 6921.

Socket CSK 

Low-profile, flush fit with Allen-wrench engagement. DIN 7991.

10.9 Bolts

For demanding applications and superior load-bearing. DIN 931.

12.9 Fine Pitch Sets

High-strength threads for precise, reliable fastening. DIN 912.

Cup Square Bolts

Secure fastening with a square neck for anti-rotation. DIN 603.

Socket Sets

For precise fastening in varied applications. DIN 916.

10.9 Bolt Sets

high-grade fastening for optimal load-bearing applications. DIN 931.

Mild Steel Bolts

Durable fasteners for versatile applications. DIN 603/934

Roofing Bolt / Nut

Secure, weather-resistant roof installations. DIN 934 / 562.

Socket Buttons

Rounded head, deep socket for reliable fastening. ISO 7380.

12.9 Bolts

high-grade fastening for optimal load-bearing applications. DIN 931.

Mild Steel Sets

Durable fasteners for versatile applications. DIN 933.

Hex Coach Screws

Heavy-duty wood fastening with hexagonal grip head. DIN 571.

Hex Keys

 Tool for engaging hexagonal socket fasteners with ease. DIN 911.

12.9 Bolt Sets

high-grade fastening for optimal load-bearing applications. DIN 931.

UNC / UNF Bolts

Unified thread standards ensuring precise fit and robust.

Chipboard Screws

Tapered, sharp threads for firm chipboard fastening. DIN 7505.

Cotter Pins

Secure mechanical components and prevent loosening. DIN 94.

8.8 Fine Pitch Bolts

Enhanced threading for tighter, precise fastening. DIN 931.

UNC / UNF Bolt Sets

Unified thread standards ensuring precise fit and robust.

Drywall Screws

Sharp-pointed, coarse thread for secure fix. DIN 18182/50021/50942

Machine Screws

Precision thread for consistent metal-metal fastening. DIN 965.

10.9 Fine Pitch Bolts

Enhanced threading for tighter, precise fastening. DIN 961.

U Bolts

U-shaped for securing pipes, conduits, or anchoring. DIN 3570.

Self Tappers

 Sharp, self-drilling screws metal or wood penetration. DIN 7981.

Engineer Studs

Double-ended thread fasteners for assemblies. DIN 938/939.

12.9 Fine Pitch Bolts

Enhanced threading for tighter, precise fastening. DIN 931.

Flange Bolts mm / imp

Flange head for even distribution & reduced slippage. DIN 6921.

Wood Screws

Tapered, sharp thread for reliable wood-wood fastenings. DIN 7997

Studding

Threaded rod for versatile fastening & extension. DIN 976.

Form A Washers

Flat washers for optimal load spread and joint integrity. DIN 125.

SQ Spring

Square section for optimal tension and fit. DIN 9780.

BS3410 Table 3 Light

Compliant with tolerances for lightweight applications.

Taper 5˚ D Shape

Diagonal for precise alignment & angular seating. DIN 434.

Form B Washers

Slightly thinner ensuring tight, close-fitting joints. DIN 125.

Rect Spring Washer

Rectangular section, split design for consistent tension. DIN 127B.

BS3410 Table 3 Heavy

Designed for high-load applications specific tolerances.

Taper 6½˚ D Shape

Diagonal for precise alignment & angular seating. DIN 434.

Form C Washers

Thin flat washers for limited-space applications. DIN 125.

Int Serrated Proof

Internal serrated for enhanced grip and anti-rotation. DIN 6797 J

BS3410 Table 4 Light

Precision-crafted, set tolerances for lighter applications.

Taper 5˚ Sq Shape

Square cut with a 5˚ taper for exact alignment/seating. DIN 434.

Form D Washers

Slim with a larger outer diameter for broader load dispersion. DIN 125.

Ext Serrated Proof

External serrated lock washer for superior fastener grip DIN 6797 J.

BS3410 Table 4 Heavy

Tailored for high-stress; meeting stringent tolerances.

F436 Washers

Hardened flat washers for structural steel bolting.

Form E Washers

BS4320 washer in a range of materials & coatings. DIN 125.

Int Serrated Proof

Internal serrated lock washer for superior fastener grip. DIN 6798 A.

BS3410 Table 1 Small

Specific tolerances for compact applications.

ASA B27.1 1965 REG

Cut and deformed to prevent loosening of the assembly.

Form F Washers

Chamfered for bearing surfaces with angular load. DIN 125.

Ext Serrated Proof

External serrated lock washer for superior fastener grip. DIN 6798 A.

BS3410 Table 2 Large

Specific tolerances for compact applications.

ASA B27.1 1965 HVY

Washers conforming to American Standards Association.

Form G Washers

Broad with a smaller inner diameter for precise fitting over bolts. DIN 125.

Double Coil Rect Spring

Dual-coil rectangular spring for high tension/security. DIN 127.

BS3410 Table 5

Engineered to meet standards for heavy-duty applications.

Phosphor Bronze

Corrosion-resistant, high-strength washers.

Sq Plate Washers

Sturdy Square washer, distributing load, strong connections. DIN 436.

Repair Washers

Fixing and restoring strength to damaged areas. DIN 9021.

BS3410 Table 6

Washers designed for specialized applications with set tolerances.

Brass Washer

Corrosion-resistant, conductive & decorative use. DIN 125.

Thru Hard Washers

Heat-treated, hardened for durable & reliable fastening. DIN 6916

Nut Faced Washers

Fit snugly against nuts, enhancing load distribution. DIN 6923.

BS3410 Table 7

For specific requirements & specialized applications.

Stainless Washers

Corrosion-resistant, durable and long-lasting fastening. DIN 125.

CE Through Bolts

CE Approved. BZP, galvanised and A4 stainless steel.

Resin Capsules

Epoxy acrylate capsules. Available as either spin or hammer version.

Concrete Anchor

Hex, hex flange, csk, pan, hook, eye and ZYP. Available in A4 stainless.

Metal Cavity Anchor 

Designed to provide a secure and solid fixing in cavity walls.

Standard Through Bolts

Standard performance product. BZP only available.

Resin Accessories

Nozzles, blow pumps, brushes, mesh sleeves, site kits, etc

KF Masonry Screw

Multi purpose with HiLo thread, rounded csk and T30 star drive.

Plasterboard Screws

Solid Fixing to/behind plaster board. Supplied with Screws.

CE Shield Anchors

CE Approved. High load bearing, only available bolt head, ZYP.

Resin Studs

Chisel point, available in ZYP, galv and A4 stainless steel, any size.

Masonry Screw

Countersunk and hex head, Blue Ruspert finish.

Universal Plug

Fixes into any base material, solid or hollow.

Standard Shield Anchors

Increased surface grip and stability via the wider bottom. DIN 6923.

Sleeve Anchors

New patent design, crush zone version for high performance.

Plastic Plugs

Available small packed on sprue or bulk packed.

Spring Toggle Fixings

Plasterboard Anchor. Supplied with pan head m/c.

Heavy Duty Anchors

Available with CE Approval, bolt, stud or csk head.

Hammerset Anchors

Available in either ZYP or A4 stainless steel.

Nylon Plugs

Available packed or bulk. Attaching items to solid masonry.

Zamac Nail In

Economical nail-in anchor with carbon steel nail.

CE Resin Cartridgs

Vinylester styrene free resin, with CE approval..

Lipped Hammerset

For enhanced performance and aesthetics, available in ZYP

Nylon Hammer Fixing

Csk or large mushroom head. ZYP or stainless. 

Ceiling Anchor

Steel fire rated fixing. For use in overhead applications.

WRAS Resin Cartridges

Pure epoxy for the strongest bond, for rebar & structural connections.

Brass Anchors

Expansion Anchor used in any base material with bolt/set/screw.

Nylon Frame Fixing

Csk pozi, csk torx or hexagon head ZYP. Available in stainless steel.

Wire Hanger 

 Ideal for suspended ceilings and partitioning.

Std. Resin Cartridges

Polyester system with or without styrene and epoxy acrylate.

Scaffold Ring Bolts

Made in the UK to BS5973:1993.

Window Frame Anchor

Nylon or steel version available.

Ex Insulation Supports

Nylon support with glass reinforced expander pin.

Pourable Resin Systems

Vinylester styrene free resin, with CE approval..

Hooks & Eyes

Cold forged. Sizes M6 to M12 available, forged pattern ZYP.

Express Nail 

suitable for all kinds of concrete and masonry substrate materials.

Insulation Supports 

Available in either nylon or A2 stainless steel.

KM45 LV System

Low velocity cartridge tool Inc. nails, cartridges, clips & spare parts.

Pipe Clamps & Hose Clips

M8/M10 bossed pipe clamps and assorted sizes hose clamps.

Wood Drill Bits

Auger, flat wood bits, forstener, brad points and countersinks.

Self Tapping Screws

Designed for flush, secure, and clean installations. DIN 912.

KMN Nail System

KMN System - Nail with 12mm steel washer.

Galvanised Banding

12/17/25mm wide galvanised banding, 1mm thick, 10mm long.

Steel Drill Bits

Rolled, ground, cobalt, long, short, hole saws, kits & countersinks.

Brass Woodscrews

Csk, round head or raised head. All slotted

AGN Nail System

Nail with 8mm steel and 9mm nylon washer.

U Clamps

 Perfect for pipework applications & for sitting around fence posts.

Jig & Sabre Blades

Secure fastening with a square neck for anti-rotation. DIN 603.

Security Screws

Tamper proof screws inc clutch head, with a self-tap option. 

Assorted Kits and Cases

Assorted kit packs, resin, KF screws, sleeve anchors. Perfect for site.

Sealant

Sanitary grade silicone, gap and panel adhesive, superglues, etc

Screwdriver Bits

Slotted, pozi, torx in a variety of lengths and kits. 

Black Japanned Woodscrews

Secure, weather-resistant roof installations. DIN 934 / 562.

Prebena Tool & Nail System

Award winning portable nailer and plastic collated nails. 

PU Foam

Hand held & gun grade. B1, B2 and B3 fire resistant available

Screw Cap & Cups

Assorted sizes/colours in plastic. Nickel plated/brass surface cups.

Chrome Dome Mirror Screw

Aesthetic chrome caped screw in a variety of lengths and coatings.

Nails for Gas Machines

Suits most modern gas powered nail machines.

Cable Clips

Available in flat white or round white.

Self Drilling Screws

Csk/hex head for light/heavy duty section steel.

Stainless Steel Screws

Secure corrosive resistant and aesthetic screws.

Brads for Gas Machines

Suits most modern gas powered finishing brad nail machines.

Cable Ties

Range of sizes and thickness and multiple colours.

Chipboard Screws

Larger threads for secure fixing to chipboard or similar.

Raised Head Chrome

Raised dome head, great for aesthetic or wood to wood uses.

Nails, Brads and Staples for Air Machines

16 and 18 gauge finishing brads, coil nails, strip nails and staples.

Sanitary Fixings

Specialist Basin and pedestal fixings. Prepack bags.

Drywall Screws

Black and BZP self tapping. BZP self drilling. Black collated.

Flange Pozi Screws

Self tapping with flange for spread loads.

Primatech Flooring Nails

Available in 38mm or 50mm. For manual and pneumatic machines.

Hammer Drill Bits

Drill into harder materials, including stone & concrete.

Decking Screws

Tapered, sharp thread for reliable wood-wood fastenings.

Wafer Head Screws

Low profile screws with Ph2 head for metal to metal fixing.

Staples

Large range of sizes and types to fit most guns.

Timber Connectors

Increase bolt performance in timber. They conform to BS EN 912

Snap Hooks

Easy to link to chain or rope. Large range of sizes, types & finishes.

Eye Bolts

Perfect for anchoring cables/ropes.

Wire Rope Grips

Clips for a quick and easy way to create eyelets in wire rope.

D Shackles

Primarily used for lifting heavy loads. Marine Grade.

Ridge Tile Nails

Extra long. Used for fixing sheets to tiles or sheets to timber rafters.

Lynch Pins

 Prevent a part from sliding off an axle & securing implements.

Masonry Nails

High force  designed for use in brick, concrete and concrete blocks.

R Clips

To secure the ends of round shafts such as axles & clevis pins.

Copper Nails & Crampions

 Long lasting, rust resistant and tough. Ideal outdoors.

Cladding Pins

UV stable, Suitable for fixing fascias, soffits etc.

More Product Groups

Standard Fasteners

Special Fasteners

Fixings & Resin

Nord-Lock

Allthread

BeamClamp & Boxbolt

Construction & Rail

FastClamp